I was intrigued when I saw Bowman Arms was selling surplus Polish PNW-57 night vision goggles on Gunbroker. I wasn’t…
Ironwood Designs is well known among AK enthusiasts the source for difficult to find stocks such as angle cut stamped…
HK 91, MARS CETME, HK 93 comparison The recoil spring / rod assembly and buffer is slightly different between the…
The RGA-86 has arrived and it is magnificent. I will eventually get some pics of the crate but for now…
The RGA-86 barged into my consciousness in late June when I received notification that a Gunbroker seller I follow had…
One of the biggest challenges facing the FS2000 enthusiast is locating various parts and accessories. With both slings and tactical…
I like to visit gun shops when I travel around the country. My preference is for older well established shops…
This write up is based on my experience with the platform and information gleaned from the F2000 armorers manual which,…
I’m really lazy about cleaning some guns, like AR-15s…. I should have taken some better before pics as I’m not…
Last week AIM offered a special on blemished Polish AK mags for $3.95 with the following caution: …..this small…
It’s been roughly three months since I got my FN303s up and running and I have some notes to share…
Amongst the FN literature on the FN303 is the option of an underbarrel mount for the M-16, M-4 and SCAR.…
I have always liked the gray look of the USR and finally got around to picking a stock set up.…
The Zeiss Fero Z51 / Orion 80 is a German surplus scope used with the HK G3 and several other…
Here are a few interesting examples of home gunsmiting (as opposed to gunsmithing) that I had the pleasure of spotting…
From my occasional browsing of GD it appears to be to troll your enemies, dox them before you, and to mock the…
The tanks require, in my experience, just as much attention as the operating system of the FN303. To start with…
One of the problems I have encountered with the FN303 is that air line is prone to getting kinked…
I recently finished rebuilding my arsenal of rotten seal FN303s, they weren’t all broke but it seemed easer to just…
In recent months there has been a Bonanza of inexpensive Beretta 92s from AIM Surplus and a number of other…
The FN303 is relatively easy to rebuild with the right parts and a few basic tools. Unfortunately the parts are…
For the last six months or so I have been casually watching the Ljungman market on Gun Broker and have…
The CMP recently made a number of Service grade Garands for sale and as Winchester remained a gaping hole in…
There has recently been an influx of FN303 “less lethal” launchers to the market which I saw as the ideal…
I finally got around to picking up the S&W Mod 65 that I ordered up from AIM a few weeks…
I’m starting this site as a public service because I’m a retard that buys too much stuff and figure maybe…